Extrusions
Aluminum
-
Army-Navy Aeronautical Design Standards:
- Some of the links below are to a website called everyspec.com. Interesting, but
they may or may not have the latest revision available. You should
check DSP(ASSIST)
for the most up-to-date copy.
- AND10133.............ANGLE - EQUAL LEG EXTRUDED (3
MAR 1982) [S/S BY SAE-AMS10133].
- AND10134.............ANGLE - UNEQUAL LEG EXTRUDED (3
MAR 1982) [S/S BY SAE-AMS10134].
- AND10136.............TEE - EXTRUDED (3 MAR 1982) [S/S
BY SAE-AMS10136].
- AND10137.............CHANNEL EXTRUDED (3 MAR 1982)
[S/S BY SAE-AMS10137].
- AND10138.............ZEE - EQUAL LEG EXTRUDED (3 MAR
1982) [S/S BY SAE-AMS10138].
- AND10139.............STANDARD, ZEE , UNEQUAL LEG
EXTRUDED (3 MAR 1982) [S/S BY SAE-AMS10139].
- AND10140.............STANDARD, "I" SECTION, EXTRUDED
(3 MAR 1982) [S/S BY SAE-AMS10140].
- Aviation
Metals Inc..METAL TYPES AND ALLOYS,
Along with hardness and weight calculator.
- Taber Extrusions......STANDARD SHAPES CATALOG.
-
Commonly stocked structural shapes
- Excerpts from Ryerson's stock list
with additions made were radii are missing.
- Angles
- Extruded-American Standard (6061).......................................pdf with unspecified fillets and rounds shown.
- Extruded-Sharp corners inside and out (6063)
- Channels
- Extruded-American Standard (6061)
- Extruded-Aluminum Association (6061),
fillets........................pdf
with
unspecified fillets shown.
- Extruded-Sharp Corner (6063)
- Beams
- Extruded-American Standard (6061)
- Extruded-Aluminum Association (6061),
fillets........................pdf
with
unspecified fillets shown.
- Tees
- Extruded-American Standard (6061),
....................................pdf
with
unspecified fillets and
rounds shown.
- Extruded-Sharp Corner (6063)
Steel
-
Structural Shapes:
- The best
source for detailed dimensions is the "Manual
of Steel Construction" published by the American Institute of Steel
Construction (AISC), but it's a little expensive. Some
information is in the Machinery's
Handbook but they get their information from AISC and the American Iron
and Steel Institute (AISI).